The Niro atomizer atomizes the test solution. The atomizer is an important component of the atomization system, and its performance has a significant correlation with the precision and chemical interference of our measurements. Therefore, we require that the spray system through the atomizer is stable, the droplets are small, uniform and the atomization efficiency is high.
What is the correct method of using Niro atomizer? Let's all briefly analyze together.
1. Add distilled water to the sink at a temperature between 15-40 degrees Celsius, and the float in the sink will float.
2. Put the medicine solution into the atomization tank, dilute to 30-50 milliliters, tighten the lid of the tank, place the atomization tank in the water tank, and tighten the lid of the water tank.
3. Connect a power supply and turn on the system power control switch. The red indicator light will light up. Preheat for about 3 minutes before turning on the atomization pressure switch. The white light will light up and the medicine will spray out in a mist.
4. When inhaling, cover your mouth and nose with a mask. When exhaling, open the mask.
5. The Niro atomizer is generally used for 15-20 minutes. After treatment, turn off the spray first, and then turn off the power switch. Otherwise, the electronic tube is easily damaged, and empty the water in the tank.
Niro Nebulizer is a commonly used medical device for patients with respiratory diseases. Liquid drugs are converted into gas through ultrasound or heating and sent into the patient's respiratory tract to treat some respiratory diseases.
When using a compressed nebulizer, attention should be paid to the usage method and care details. Usage:
1. Wash by hand and dry.
2. Place the host on a sturdy surface and insert the power cord of the compressor into the socket.
3. Connect the main engine and atomizer through an air duct.
4. Pour the medication directly into the nebulizer cup, screw on the top of the nebulizer cup, and connect it to the mask or bite.
Pусский
