The atomization principle of desulfurization atomization disc is air rupture and impact, which produces atomized particles with small diameter, wide coverage and strong penetrating power. The gas and liquid are mixed and atomized in the air cap cavity. Through the degree of friction between the compressed air and the liquid, a very uniform and fine atomization effect is produced, and the atomized particle size is 80 microns or less under normal conditions.
Spray cans used for spraying chemicals or chemical liquids need to be cleaned after use, especially the flue gas desulfurization atomization tower plate, which is a filling tool that is very susceptible to corrosion and corrosive liquids or pesticides when sprayed. In order to protect the system equipment from damage by these corrosive products, timely maintenance and cleaning must be carried out.
1. After use, the remaining liquid needs to be wiped away and then cleaned with a special cleaner.
2. A complete set of positioning and maintenance work is also required when cleaning the atomization disc. If the atomizer atomizer disc equipment has been worn, it must be refinished with a sanding tool or polishing tool to polish the color and shine.
3. The polished desulfurization atomization disk needs to be treated simply to avoid mixing debris into the drug or pesticide in the next use, otherwise it will affect the normal function of the liquid and the stability of its performance.
These are the maintenance steps after using the desulfurization atomization tray, do not be lazy or simplify the cleaning steps. Proper cleaning is a very effective way to protect your equipment.
Pусский
